• Accessories
    • Wall Furnishings
    • Storage
    • Mirrors
    • Textile
  • Furniture
    • Tables
      • Side Tables
      • Desks
      • Dining Tables
      • Coffee Tables
    • Storage
      • Cabinets
    • Sleeping
      • Beds
      • Nightstands
    • Seating
      • Sofa/ Bench
      • Bar Stool
      • Dining Chairs
      • Stools
      • Lounge Chairs
      • Rocking Chairs
  • Lighting
    • Pendant Lights
    • Wall/ Ceiling Lights
    • Floor Lamps
  • Sale

Select

  • Designer
  • Autoban
  • Ayush Kasliwal
  • Charlene Mullen
  • Erik Boogerd
  • Luca Nichetto
  • Matthew Hilton
  • Neri & Hu
  • Studioilse
  • Producer
  • De La Espada
  • Droog
  • Frama
  • Mambo Unlimited
  • Mater
  • Seletti
  • Sollos
  • Suited Products
Maintenance Information General information

Stool - Leather

Model

441A

Producer

De La Espada

Designer

Studioilse

Specifications

Available in solid American black walnut with a Danish oil finish, American white oak with a Danish oil or white oil finish, or European ash painted pure white RAL 9010 (eggshell finish) or black brown RAL 8022 (eggshell finish). Copper feet. Brown or black naked leather seat.
 
Size
D32 × H43 cm
D12 3/5 × H16 7/8 ”
 
Delivery time
9-11 weeks

Attachment(s) (pdf)

Looking After Your Furniture 0410201329.pdf

WinterCare27111393.pdf

 

Ash Painted

Our ash timber is applied with black paint RAL 8022. Ash is a hardwood that has long been prized by cabinetmakers due to its versatility and simple beauty. This dense timber has a coarse yet even texture, compressive strength, and an appealing straight grain. It varies in colour from a cream to pale tan colour and accepts stains and coatings more readily than other timbers.
 
The Ash timber we use is sustainably grown in Europe. The trees on the farms are pruned regularly to allow for consistent grain patterns and fewer knots, ensuring exceptionally strong planks of the highest quality. Mortise and tenon joints, dovetailing and lap joints combined with slow-drying wood glue that seeps deep into the fibers of the solid wood create strong, unbreakable bonds adding long life to every piece of furniture we make.
 
The ash timber is applied with a paint with an eggshell finish, which seals the pores of the timber, enhancing the natural structure of the wood and forming a water repellent protection against everyday wear and tear.
 
For daily maintenance, dust the surface. Use a damp cloth for periodic cleaning. If desired, a mild soap heavily diluted with water may be used to clean. Do not use spirits, bleaches or any other chemical cleaners to clean the surface. Prevention is the best protection against surface scratches. Use mats and coasters to protect the surface. Please ensure that direct contact with hot objects is avoided by using tablemats. Avoid spillages and do not use any corrosive products such as bleach anywhere near the timber. Any spillages should be wiped clean immediately.
 
Keep away from extreme temperatures and climate changes. Not for use near a radiator. Every care has been taken in manufacture to stabilize the wood to avoid warping and to allow for expansion and contraction of the timber without problems. However, it is essential that you care for your solid wood furniture by normalizing its living conditions as much as possible. A humidifier can provide a consistent climate for the wood so it does not dry out during the winter months.

Naked Leather

Naked leather is soft and supple with a natural feel. It is breathable, and naturally resistant to tears and punctures.
 
CARE INSTRUCTIONS
 
Naked leathers contain no foreign substances that act as a barrier against spillage or staining, so the leather will age naturally in response to its environment, the oils in the user’s skin and other factors, resulting in a beautiful patina.
 
If you wish to add a barrier of protection to try to keep the orginal look for longer, then it is important immediately upon receiving your leather item, to apply a high quality water and stain repellent for leather which is free of silcone and wax. (We recommend testing the product on a small hidden area of the leather first.) Note that repellant will change the colour, in most cases darkening the leather. Reapply every two to three months with regular use.
 
To clean, wipe the entire surface with a soft damp cloth. This will somewhat even out any abrasions and stains. Do not spot rub as it will darken the leather in that area. Gently blot up spills immediately, using a clean cloth. If your leather becomes wet, mop up any excess water with a cloth, then allow the leather to dry at room temperature before applying the stain repellent as above. For more serious stains, visit a professional leather cleaner. The professional cleaning process may cause slight variations in colour and texture so we recommend cleaning all matching items at the same time.
 
Keep sharp and heavy objects such as keys away from the leather to avoid marking. Occasionally vacuum furniture upholstered in leather. Avoid excessive heat and if possible direct sunlight as these will dry the leather.
 
High humidity, warm temperatures, poor ventilation, and soiling can cause mould to grow on leather. It is important to keep the leather clean and to control the environment where the leather products are kept to prevent mould formation. We recommend using a Hygrometer to monitor the Relative Humidity in your home, to ensure that the conditions are neither too humid, nor too dry. The ideal conditions for your furniture are 50% relative humidity at 20 degrees Celsius (normal interior temperature).
 
Air conditioners or dehumidifiers can remove moisture from the air, and either should be used with windows and doors kept closed.
 
If mould does form, follow this procedure: Remove mould with a soft bristle brush (such as toothbrush), if possible outdoors to prevent scattering mildew spores in the home. Run a vacuum cleaner attachment over the surface of the leather to draw out more of the mould, being sure to immediately dispose of the vacuum bag outdoors. Dry the leather with an electric heater, fan, or sun and air. If necessary, sponge lightly with thick suds of mild soap and wipe with a clean damp cloth, being sure to avoid soaking the leather.

Oak Oiled

De La Espada use a traditional wood oil finish followed by wax, applied by even application to the timber planks. This finish seals the pores of the timber, enhancing the natural structure of the wood and forming a water repellent protection against everyday wear and tear. This finish deepens the natural colour of the timber. One important benefit of this finish is the relative ease with which damage is repaired, as the timber can be reapplied with wax at any moment. We recommend you use only products supplied or approved by De La Espada.
 
For daily maintenance of tabletops and shelves use a damp cloth or sponge with clean water, wiping down the whole surface as one. When done correctly, this procedure should deal with any small hairline scratches, daily wear and tear and dust build up. Do not concentrate cleaning or wiping on small patches/areas of the tabletop or shelves, even if the mark/tarnish is located in one particular part of the surface. This will cause the surface to appear patchy due to uneven wiping and rubbing. Do not use spirits, bleaches or any other chemical cleaners to clean the timber.
 
Please ensure that direct contact with hot objects is avoided by using tablemats. Avoid spillages and do not use any corrosive products such as bleach anywhere near the timber. Any spillages should be wiped clean immediately. Once the immediate spillage is cleared, ensure that the whole surface is wiped clean.
 
For long-term general maintenance, periodic reapplication of wax is required. Ideally, the furniture should be waxed in the following way every six months to a year. You will need hard wax, and two soft white cloths. Take a small piece of hard wax, the size relative to the surface being cleaned. As a guideline, you should use approximately 1 level teaspoon of wax for the top of a dining table, and a pea size amount for the arm of a chair. Rub the wax into one of the soft cloths. It is important to rub the wax thoroughly into the cloth, so it is one even, thin layer, almost becoming part of the cloth. First push the wax into the cloth with a circular movement of your hand, then grab both sides of the cloth and rub them together. Once the wax is thoroughly worked in, use the cloth to rub the entire surface of the timber, always following the grain direction. Wipe the surface with the clean white cloth to rid of excess wax. Allow the surface to dry for 24 hours before use.
 
For daily wear and tear, and water marks use the following procedure. You will need hard wax, two soft white cloths, and one soft plastic mesh scouring pad (such as Scotch Brite). Prepare the waxy cloth as per above instructions, then set the cloth to one side. Take the scouring pad, and rub the affected area, following the direction of the wood grain, then wipe the area with the waxy cloth. Alternate rubbing with the scouring pad and the waxy cloth until the mark is removed. Then wax the entire surface. Always follow the grain direction. Wipe the surface with the clean white cloth to rid of excess wax. Allow the surface to dry for 24 hours before use.
 
For light damage, scratches and stains, use the following procedure. You will need hard wax, two soft white cloths, and one 250 grit (very fine) sanding sponge. Prepare the waxy cloth as per above instructions, then set the cloth to one side. Take the sanding sponge, and sand in long strokes across the affected area, following the direction of the wood grain. To avoid an uneven appearance, do not concentrate the sanding exclusively on a single patch, and sand only until the mark is removed. Too much sanding may remove the layers of oil thus creating a patchy finish. Wipe the surface with the clean white cloth to rid of all dust. Take the previously prepared waxy cloth and rub onto the planks, following the grain direction. Rub into the entire surface, concentrating more on the sanded area. Be sure to always follow the grain direction. After wiping thoroughly several times, take the clean white cloth and wipe the surface to rid of any excess wax. Allow the surface to dry for 24 hours before use.
 
For deep scratches, we recommend professional refinishing.
 
Keep away from extreme temperatures and climate changes. Not for use near a radiator. Every care has been taken in manufacture to stabilise the wood to avoid warping and to allow for expansion and contraction of the timber without problems. However, it is essential that you care for your solid wood furniture by normalizing its living conditions as much as possible. A humidifier can provide a consistent climate for the wood so it does not dry out during the winter months.
 
IMPORTANT SAFETY INFORMATION - Always protect your hands with gloves when applying wax. Do not store wax near sources of extreme temperature. Do not take internally. Keep out of reach of children.

Walnut Oiled

De La Espada use a traditional wood oil finish followed by wax, applied by even application to the timber planks. This finish seals the pores of the timber, enhancing the natural structure of the wood and forming a water repellent protection against everyday wear and tear. This finish deepens the natural colour of the timber. One important benefit of this finish is the relative ease with which damage is repaired, as the timber can be reapplied with wax at any moment. We recommend you use only products supplied or approved by De La Espada.
 
For daily maintenance of tabletops and shelves use a damp cloth or sponge with clean water, wiping down the whole surface as one. When done correctly, this procedure should deal with any small hairline scratches, daily wear and tear and dust build up. Do not concentrate cleaning or wiping on small patches/areas of the tabletop or shelves, even if the mark/tarnish is located in one particular part of the surface. This will cause the surface to appear patchy due to uneven wiping and rubbing. Do not use spirits, bleaches or any other chemical cleaners to clean the timber.
 
Please ensure that direct contact with hot objects is avoided by using tablemats. Avoid spillages and do not use any corrosive products such as bleach anywhere near the timber. Any spillages should be wiped clean immediately. Once the immediate spillage is cleared, ensure that the whole surface is wiped clean.
 
For long-term general maintenance, periodic reapplication of wax is required. Ideally, the furniture should be waxed in the following way every six months to a year. You will need hard wax, and two soft white cloths. Take a small piece of hard wax, the size relative to the surface being cleaned. As a guideline, you should use approximately 1 level teaspoon of wax for the top of a dining table, and a pea size amount for the arm of a chair. Rub the wax into one of the soft cloths. It is important to rub the wax thoroughly into the cloth, so it is one even, thin layer, almost becoming part of the cloth. First push the wax into the cloth with a circular movement of your hand, then grab both sides of the cloth and rub them together. Once the wax is thoroughly worked in, use the cloth to rub the entire surface of the timber, always following the grain direction. Wipe the surface with the clean white cloth to rid of excess wax. Allow the surface to dry for 24 hours before use.
 
For daily wear and tear, and water marks use the following procedure. You will need hard wax, two soft white cloths, and one soft plastic mesh scouring pad (such as Scotch Brite). Prepare the waxy cloth as per above instructions, then set the cloth to one side. Take the scouring pad, and rub the affected area, following the direction of the wood grain, then wipe the area with the waxy cloth. Alternate rubbing with the scouring pad and the waxy cloth until the mark is removed. Then wax the entire surface. Always follow the grain direction. Wipe the surface with the clean white cloth to rid of excess wax. Allow the surface to dry for 24 hours before use.
 
For light damage, scratches and stains, use the following procedure. You will need hard wax, two soft white cloths, and one 250 grit (very fine) sanding sponge. Prepare the waxy cloth as per above instructions, then set the cloth to one side. Take the sanding sponge, and sand in long strokes across the affected area, following the direction of the wood grain. To avoid an uneven appearance, do not concentrate the sanding exclusively on a single patch, and sand only until the mark is removed. Too much sanding may remove the layers of oil thus creating a patchy finish. Wipe the surface with the clean white cloth to rid of all dust. Take the previously prepared waxy cloth and rub onto the planks, following the grain direction. Rub into the entire surface, concentrating more on the sanded area. Be sure to always follow the grain direction. After wiping thoroughly several times, take the clean white cloth and wipe the surface to rid of any excess wax. Allow the surface to dry for 24 hours before use.
 
For deep scratches, we recommend professional refinishing.
 
Keep away from extreme temperatures and climate changes. Not for use near a radiator. Every care has been taken in manufacture to stabilise the wood to avoid warping and to allow for expansion and contraction of the timber without problems. However, it is essential that you care for your solid wood furniture by normalizing its living conditions as much as possible. A humidifier can provide a consistent climate for the wood so it does not dry out during the winter months.
 
IMPORTANT SAFETY INFORMATION - Always protect your hands with gloves when applying wax. Do not store wax near sources of extreme temperature. Do not take internally. Keep out of reach of children.

Order

Timber options

edit
  • Oak sample Suite Wood
  • White Oiled Oak Sample Suite Wood
  • Danish Oiled Walnut Sample Suite Wood

Fabric

edit

Subtotal: € 635.25